This Gitlab instance will require Two-Factor-Authentication from 2021-10-01. Read how to enable 2FA.

fs-copy-simplyfied.py 13.5 KB
Newer Older
kuhnm's avatar
kuhnm committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344
# Copyright (c) 2010-2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder.  You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2012-2014 Mark D. Hill and David A. Wood
# Copyright (c) 2009-2011 Advanced Micro Devices, Inc.
# Copyright (c) 2006-2007 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Ali Saidi
#          Brad Beckmann

import optparse
import sys

import m5
from m5.defines import buildEnv
from m5.objects import *
from m5.util import addToPath, fatal

addToPath('../common')
addToPath('../ruby')

import Ruby

from FSConfig import *
from SysPaths import *
from Benchmarks import *
import Simulation
import CacheConfig
import MemConfig
from Caches import *
import Options


# Check if KVM support has been enabled, we might need to do VM
# configuration if that's the case.
have_kvm_support = 'BaseKvmCPU' in globals()
def is_kvm_cpu(cpu_class):
    return have_kvm_support and cpu_class != None and \
        issubclass(cpu_class, BaseKvmCPU)

def cmd_line_template():
    if options.command_line and options.command_line_file:
        print "Error: --command-line and --command-line-file are " \
              "mutually exclusive"
        sys.exit(1)
    if options.command_line:
        return options.command_line
    if options.command_line_file:
        return open(options.command_line_file).read().strip()
    return None

def build_test_system(np):
    cmdline = cmd_line_template()
    if buildEnv['TARGET_ISA'] == "alpha":
        test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
                                        cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == "mips":
        test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == "sparc":
        test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == "x86":
        test_sys = makeLinuxX86System(test_mem_mode, options.num_cpus, bm[0],
                options.ruby, cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == "arm":
        test_sys = makeArmSystem(test_mem_mode, options.machine_type,
                                 options.num_cpus, bm[0], options.dtb_filename,
                                 bare_metal=options.bare_metal,
                                 cmdline=cmdline,
                                 external_memory=options.external_memory_system)
        if options.enable_context_switch_stats_dump:
            test_sys.enable_context_switch_stats_dump = True
    else:
        fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])

    # Set the cache line size for the entire system
    test_sys.cache_line_size = options.cacheline_size

    # Create a top-level voltage domain
    test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)

    # Create a source clock for the system and set the clock period
    test_sys.clk_domain = SrcClockDomain(clock =  options.sys_clock,
            voltage_domain = test_sys.voltage_domain)

    # Create a CPU voltage domain
    test_sys.cpu_voltage_domain = VoltageDomain()

    # Create a source clock for the CPUs and set the clock period
    test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
                                             voltage_domain =
                                             test_sys.cpu_voltage_domain)

    if options.kernel is not None:
        test_sys.kernel = binary(options.kernel)

    if options.script is not None:
        test_sys.readfile = options.script

    if options.lpae:
        test_sys.have_lpae = True

    if options.virtualisation:
        test_sys.have_virtualization = True

    test_sys.init_param = options.init_param

    # For now, assign all the CPUs to the same clock domain
    test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
                    for i in xrange(np)]

    if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
        test_sys.vm = KvmVM()

    if options.ruby:
        # Check for timing mode because ruby does not support atomic accesses
        if not (options.cpu_type == "detailed" or options.cpu_type == "timing"):
            print >> sys.stderr, "Ruby requires TimingSimpleCPU or O3CPU!!"
            sys.exit(1)

        Ruby.create_system(options, True, test_sys, test_sys.iobus,
                           test_sys._dma_ports)

        # Create a seperate clock domain for Ruby
        test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
                                        voltage_domain = test_sys.voltage_domain)

        # Connect the ruby io port to the PIO bus,
        # assuming that there is just one such port.
        test_sys.iobus.master = test_sys.ruby._io_port.slave

        for (i, cpu) in enumerate(test_sys.cpu):
            #
            # Tie the cpu ports to the correct ruby system ports
            #
            cpu.clk_domain = test_sys.cpu_clk_domain
            cpu.createThreads()
            cpu.createInterruptController()

            cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
            cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave

            if buildEnv['TARGET_ISA'] == "x86":
                cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
                cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave

                cpu.interrupts.pio = test_sys.ruby._cpu_ports[i].master
                cpu.interrupts.int_master = test_sys.ruby._cpu_ports[i].slave
                cpu.interrupts.int_slave = test_sys.ruby._cpu_ports[i].master

    else:
        if options.caches or options.l2cache:
            # By default the IOCache runs at the system clock
            test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
            test_sys.iocache.cpu_side = test_sys.iobus.master
            test_sys.iocache.mem_side = test_sys.membus.slave
        elif not options.external_memory_system:
            test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
            test_sys.iobridge.slave = test_sys.iobus.master
            test_sys.iobridge.master = test_sys.membus.slave

        # Sanity check
        if options.fastmem:
            if TestCPUClass != AtomicSimpleCPU:
                fatal("Fastmem can only be used with atomic CPU!")
            if (options.caches or options.l2cache):
                fatal("You cannot use fastmem in combination with caches!")

        if options.simpoint_profile:
            if not options.fastmem:
                # Atomic CPU checked with fastmem option already
                fatal("SimPoint generation should be done with atomic cpu and fastmem")
            if np > 1:
                fatal("SimPoint generation not supported with more than one CPUs")

        for i in xrange(np):
            if options.fastmem:
                test_sys.cpu[i].fastmem = True
            if options.simpoint_profile:
                test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
            if options.checker:
                test_sys.cpu[i].addCheckerCpu()
            test_sys.cpu[i].createThreads()

        CacheConfig.config_cache(options, test_sys)
        MemConfig.config_mem(options, test_sys)

    return test_sys

def build_drive_system(np):
    # driver system CPU is always simple, so is the memory
    # Note this is an assignment of a class, not an instance.
    DriveCPUClass = AtomicSimpleCPU
    drive_mem_mode = 'atomic'
    DriveMemClass = SimpleMemory

    cmdline = cmd_line_template()
    if buildEnv['TARGET_ISA'] == 'alpha':
        drive_sys = makeLinuxAlphaSystem(drive_mem_mode, bm[1], cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == 'mips':
        drive_sys = makeLinuxMipsSystem(drive_mem_mode, bm[1], cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == 'sparc':
        drive_sys = makeSparcSystem(drive_mem_mode, bm[1], cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == 'x86':
        drive_sys = makeLinuxX86System(drive_mem_mode, np, bm[1],
                                       cmdline=cmdline)
    elif buildEnv['TARGET_ISA'] == 'arm':
        drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, np,
                                  bm[1], options.dtb_filename, cmdline=cmdline)

    # Create a top-level voltage domain
    drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)

    # Create a source clock for the system and set the clock period
    drive_sys.clk_domain = SrcClockDomain(clock =  options.sys_clock,
            voltage_domain = drive_sys.voltage_domain)

    # Create a CPU voltage domain
    drive_sys.cpu_voltage_domain = VoltageDomain()

    # Create a source clock for the CPUs and set the clock period
    drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
                                              voltage_domain =
                                              drive_sys.cpu_voltage_domain)

    drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
                                  cpu_id=0)
    drive_sys.cpu.createThreads()
    drive_sys.cpu.createInterruptController()
    drive_sys.cpu.connectAllPorts(drive_sys.membus)
    if options.fastmem:
        drive_sys.cpu.fastmem = True
    if options.kernel is not None:
        drive_sys.kernel = binary(options.kernel)

    if is_kvm_cpu(DriveCPUClass):
        drive_sys.vm = KvmVM()

    drive_sys.iobridge = Bridge(delay='50ns',
                                ranges = drive_sys.mem_ranges)
    drive_sys.iobridge.slave = drive_sys.iobus.master
    drive_sys.iobridge.master = drive_sys.membus.slave

    # Create the appropriate memory controllers and connect them to the
    # memory bus
    drive_sys.mem_ctrls = [DriveMemClass(range = r)
                           for r in drive_sys.mem_ranges]
    for i in xrange(len(drive_sys.mem_ctrls)):
        drive_sys.mem_ctrls[i].port = drive_sys.membus.master

    drive_sys.init_param = options.init_param

    return drive_sys

# Add options
parser = optparse.OptionParser()
Options.addCommonOptions(parser)
Options.addFSOptions(parser)

# Add the ruby specific and protocol specific options
if '--ruby' in sys.argv:
    Ruby.define_options(parser)

(options, args) = parser.parse_args()

if args:
    print "Error: script doesn't take any positional arguments"
    sys.exit(1)

# system under test can be any CPU
(TestCPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)

# Match the memories with the CPUs, based on the options for the test system
TestMemClass = Simulation.setMemClass(options)

if options.benchmark:
    try:
        bm = Benchmarks[options.benchmark]
    except KeyError:
        print "Error benchmark %s has not been defined." % options.benchmark
        print "Valid benchmarks are: %s" % DefinedBenchmarks
        sys.exit(1)
else:
    if options.dual:
        bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
                        mem=options.mem_size, os_type=options.os_type),
              SysConfig(disk=options.disk_image, rootdev=options.root_device,
                        mem=options.mem_size, os_type=options.os_type)]
    else:
        bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
                        mem=options.mem_size, os_type=options.os_type)]

np = options.num_cpus

test_sys = build_test_system(np)
if len(bm) == 2:
    drive_sys = build_drive_system(np)
    root = makeDualRoot(True, test_sys, drive_sys, options.etherdump)
elif len(bm) == 1:
    root = Root(full_system=True, system=test_sys)
else:
    print "Error I don't know how to create more than 2 systems."
    sys.exit(1)

if options.timesync:
    root.time_sync_enable = True

if options.frame_capture:
    VncServer.frame_capture = True

Simulation.setWorkCountOptions(test_sys, options)
Simulation.run(options, root, test_sys, FutureClass)